nanoFramework.Iot.Device.Bmxx80 1.0.288-preview.95

The ID prefix of this package has been reserved for one of the owners of this package by NuGet.org. Prefix Reserved
This is a prerelease version of nanoFramework.Iot.Device.Bmxx80.
There is a newer version of this package available.
See the version list below for details.
dotnet add package nanoFramework.Iot.Device.Bmxx80 --version 1.0.288-preview.95
NuGet\Install-Package nanoFramework.Iot.Device.Bmxx80 -Version 1.0.288-preview.95
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package.
<PackageReference Include="nanoFramework.Iot.Device.Bmxx80" Version="1.0.288-preview.95" />
For projects that support PackageReference, copy this XML node into the project file to reference the package.
paket add nanoFramework.Iot.Device.Bmxx80 --version 1.0.288-preview.95
#r "nuget: nanoFramework.Iot.Device.Bmxx80, 1.0.288-preview.95"
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package.
// Install nanoFramework.Iot.Device.Bmxx80 as a Cake Addin
#addin nuget:?package=nanoFramework.Iot.Device.Bmxx80&version=1.0.288-preview.95&prerelease

// Install nanoFramework.Iot.Device.Bmxx80 as a Cake Tool
#tool nuget:?package=nanoFramework.Iot.Device.Bmxx80&version=1.0.288-preview.95&prerelease

BMxx80 Device Family

BMxx80 is a device family that senses temperature, barometric pressure, altitude, humidity and VOC gas.

SPI and I2C can be used to communicate with the device (only I2C implemented so far).

Documentation

The implementation supports the following devices:

  • BMP280 temperature and barometric pressure sensor (Datasheet)
  • BME280 temperature, barometric pressure and humidity sensor (Datasheet)
  • BME680 temperature, barometric pressure, humidity and VOC gas sensor (Datasheet)

Usage

BME280

Important: make sure you properly setup the I2C pins especially for ESP32 before creating the I2cDevice, make sure you install the nanoFramework.Hardware.ESP32 nuget:

//////////////////////////////////////////////////////////////////////
// when connecting to an ESP32 device, need to configure the I2C GPIOs
// used for the bus
Configuration.SetPinFunction(21, DeviceFunction.I2C1_DATA);
Configuration.SetPinFunction(22, DeviceFunction.I2C1_CLOCK);

For other devices like STM32, please make sure you're using the preset pins for the I2C bus you want to use.

// bus id on the MCU
const int busId = 1;
I2cConnectionSettings i2cSettings = new(busId, Bme280.DefaultI2cAddress);
using I2cDevice i2cDevice = I2cDevice.Create(i2cSettings);
using Bme280 bme80 = new Bme280(i2cDevice)
{
    // set higher sampling
    TemperatureSampling = Sampling.LowPower,
    PressureSampling = Sampling.UltraHighResolution,
    HumiditySampling = Sampling.Standard,

};

// Perform a synchronous measurement
var readResult = bme80.Read();

// Note that if you already have the pressure value and the temperature, you could also calculate altitude by using
// var altValue = WeatherHelper.CalculateAltitude(preValue, defaultSeaLevelPressure, tempValue) which would be more performant.
bme80.TryReadAltitude(defaultSeaLevelPressure, out var altValue);

Debug.WriteLine($"Temperature: {readResult.Temperature?.DegreesCelsius:0.#}\u00B0C");
Debug.WriteLine($"Pressure: {readResult.Pressure?.Hectopascals:0.##}hPa");
Debug.WriteLine($"Altitude: {altValue.Meters:0.##}m");
Debug.WriteLine($"Relative humidity: {readResult.Humidity?.Percent:0.#}%");

BMP680

// The I2C bus ID on the MCU
const int busId = 1;

I2cConnectionSettings i2cSettings = new(busId, Bme680.DefaultI2cAddress);
I2cDevice i2cDevice = I2cDevice.Create(i2cSettings);

using Bme680 bme680 = new Bme680(i2cDevice, Temperature.FromDegreesCelsius(20.0));

// reset will change settings back to default
bme680.Reset();

// Perform a synchronous measurement
var readResult = bme680.Read();

// Print out the measured data
Debug.WriteLine($"Gas resistance: {readResult.GasResistance?.Ohms:0.##}Ohm");
Debug.WriteLine($"Temperature: {readResult.Temperature?.DegreesCelsius:0.#}\u00B0C");
Debug.WriteLine($"Pressure: {readResult.Pressure?.Hectopascals:0.##}hPa");
Debug.WriteLine($"Relative humidity: {readResult.Humidity?.Percent:0.#}%");

BMP280

// bus id on the MCU
const int busId = 1;

I2cConnectionSettings i2cSettings = new(busId, Bmp280.DefaultI2cAddress);
I2cDevice i2cDevice = I2cDevice.Create(i2cSettings);
using var i2CBmp280 = new Bmp280(i2cDevice);

// set higher sampling
i2CBmp280.TemperatureSampling = Sampling.LowPower;
i2CBmp280.PressureSampling = Sampling.UltraHighResolution;

// Perform a synchronous measurement
var readResult = i2CBmp280.Read();

// Print out the measured data
Debug.WriteLine($"Temperature: {readResult.Temperature?.DegreesCelsius:0.#}\u00B0C");
Debug.WriteLine($"Pressure: {readResult.Pressure?.Hectopascals:0.##}hPa");

You also have 3 examples on how to use this device binding are available in the samples folder.

The following fritzing diagram illustrates one way to wire up the BMP280 with an MCU like ESP32 using I2C:

ESP32 Breadboard diagram

General:

Bmp280 MCU
Vin Power pin
GND Ground

I2C:

Bmp280 MCU
SCK I2C clock pin
SDI I2C data pin

Connection Type

The following connection types are supported by this binding.

  • I2C
  • SPI
Product Compatible and additional computed target framework versions.
.NET Framework net is compatible. 
Compatible target framework(s)
Included target framework(s) (in package)
Learn more about Target Frameworks and .NET Standard.

NuGet packages

This package is not used by any NuGet packages.

GitHub repositories (2)

Showing the top 2 popular GitHub repositories that depend on nanoFramework.Iot.Device.Bmxx80:

Repository Stars
dotnet/samples
Sample code referenced by the .NET documentation
nanoframework/Samples
🍬 Code samples from the nanoFramework team used in testing, proof of concepts and other explorational endeavours
Version Downloads Last updated
1.2.514 83 3/22/2024
1.2.494 145 2/28/2024
1.2.474 151 1/24/2024
1.2.462 163 1/5/2024
1.2.458 136 12/20/2023
1.2.456 106 12/13/2023
1.2.442 203 11/15/2023
1.2.436 107 11/10/2023
1.2.416 128 11/8/2023
1.2.403 197 10/6/2023
1.2.396 178 9/27/2023
1.2.384 192 9/6/2023
1.2.378 160 8/16/2023
1.2.369 208 8/2/2023
1.2.363 136 7/28/2023
1.2.357 129 7/19/2023
1.2.354 187 7/14/2023
1.2.345 161 6/21/2023
1.2.341 129 6/14/2023
1.2.337 170 6/7/2023
1.2.335 115 6/2/2023
1.2.329 127 5/26/2023
1.2.316 162 5/16/2023
1.2.313 128 5/12/2023
1.2.308 155 5/11/2023
1.2.302 131 5/10/2023
1.2.297 147 5/3/2023
1.2.273 301 3/17/2023
1.2.267 259 3/10/2023
1.2.263 228 3/8/2023
1.2.259 275 2/27/2023
1.2.256 224 2/24/2023
1.2.253 215 2/22/2023
1.2.222 351 1/9/2023
1.2.217 311 1/6/2023
1.2.215 270 1/6/2023
1.2.212 288 1/5/2023
1.2.210 316 1/4/2023
1.2.208 283 1/3/2023
1.2.203 299 12/28/2022
1.2.159 383 11/14/2022
1.2.157 332 11/9/2022
1.2.155 335 11/6/2022
1.2.153 347 11/5/2022
1.2.141 405 10/25/2022
1.2.128 389 10/22/2022
1.2.125 396 10/12/2022
1.2.87 497 9/15/2022
1.2.66 399 9/4/2022
1.2.63 399 9/3/2022
1.2.47 426 8/15/2022
1.2.40 440 8/6/2022
1.2.38 435 8/5/2022
1.2.28 450 8/1/2022
1.2.13 459 7/24/2022
1.2.10 422 7/23/2022
1.1.147.4251 512 7/8/2022
1.1.145.58726 419 7/7/2022
1.1.135.7416 448 7/1/2022
1.1.133.52556 454 6/30/2022
1.1.123.24311 445 6/27/2022
1.1.121.35854 417 6/26/2022
1.1.116.8772 460 6/24/2022
1.1.113.2032 436 6/23/2022
1.1.109.32999 460 6/16/2022
1.1.102.51394 417 6/15/2022
1.1.99.36719 415 6/14/2022
1.1.97.17326 432 6/13/2022
1.1.92.53000 460 6/8/2022
1.1.75.16702 445 6/1/2022
1.1.72.29765 438 5/31/2022
1.1.67.25390 445 5/27/2022
1.1.64.21380 428 5/26/2022
1.1.59.7661 444 5/24/2022
1.1.58.10097 440 5/23/2022
1.1.54.28879 428 5/23/2022
1.1.44.45306 467 5/6/2022
1.1.40 456 5/5/2022
1.1.11 493 4/19/2022
1.1.3 490 4/15/2022
1.1.1 432 4/14/2022
1.0.300 511 3/31/2022
1.0.288-preview.114 119 3/25/2022
1.0.288-preview.113 111 3/25/2022
1.0.288-preview.104 102 3/22/2022
1.0.288-preview.103 102 3/21/2022
1.0.288-preview.100 110 3/19/2022
1.0.288-preview.99 122 3/18/2022
1.0.288-preview.98 106 3/18/2022
1.0.288-preview.95 115 3/15/2022
1.0.288-preview.93 106 3/15/2022
1.0.288-preview.87 114 3/10/2022
1.0.288-preview.86 130 3/8/2022
1.0.288-preview.77 126 2/27/2022
1.0.288-preview.75 115 2/26/2022
1.0.288-preview.65 170 2/18/2022
1.0.288-preview.63 113 2/16/2022
1.0.288-preview.61 120 2/12/2022
1.0.288-preview.58 123 2/10/2022
1.0.288-preview.53 115 2/9/2022
1.0.288-preview.48 141 2/4/2022
1.0.288-preview.41 132 1/31/2022
1.0.288-preview.29 130 1/28/2022
1.0.288-preview.20 137 1/27/2022
1.0.288-preview.19 126 1/27/2022
1.0.288-preview.18 133 1/27/2022
1.0.288-preview.5 134 1/24/2022
1.0.288-preview.1 121 1/21/2022
1.0.272 496 1/10/2022
1.0.259 496 12/9/2021
1.0.258 320 12/7/2021
1.0.164 917 9/9/2021
1.0.157 350 9/4/2021
1.0.154 313 8/30/2021
1.0.153 339 8/14/2021
1.0.151 338 8/6/2021
1.0.146 346 7/22/2021
1.0.138 364 7/18/2021
1.0.136 387 7/17/2021
1.0.135 157 7/16/2021
1.0.134 167 7/15/2021
1.0.133 181 7/14/2021
1.0.131 178 7/8/2021
1.0.130 479 7/6/2021
1.0.129 162 7/6/2021
1.0.127 173 7/5/2021
1.0.126 173 7/5/2021
1.0.125 184 7/5/2021
1.0.122 213 6/30/2021
1.0.121 196 6/29/2021
1.0.120 185 6/29/2021
1.0.119 220 6/28/2021
1.0.118 225 6/20/2021
1.0.111 184 6/14/2021
1.0.110 229 6/9/2021
1.0.109 157 6/8/2021
1.0.106 196 6/1/2021
1.0.104 240 5/29/2021
1.0.103 204 5/28/2021
1.0.97 175 5/28/2021
1.0.90 179 5/27/2021
1.0.64 168 5/26/2021
1.0.19 216 5/21/2021