RfmUsb.Net 2.0.5

RfmUsb

Api for the USB Rfm69 and Rfm9x serial device. The api allows for all configuration parameters of the Rfm69 and Rfm9x radio module to be configured via a command line interface.

Installing RfmUsb

Install the RfmUsb package via nuget package manager console:

Install-Package RfmUsb.Net

Supported .Net Runtimes

The RfmUsb.Net package is compatible with the following runtimes:

• .Net Core 7.0

Creating Instance

An instance of an RfmUsb class can be created by providing an instance of an ILogger and a ISerialPortFactory

var logger = GetLogger();

var serialPortFactory = GetSerialPortFactory();

var rfmUsbDevice = Rfm69(logger, serialPortFactory);

Alternatively an instance can be configured using the standard microsoft DI framework.

var serviceCollection = new ServiceCollection()
                .AddLogging(builder => builder.AddSerilog())
                .AddLogging()
                .AddRfmUsb(); // Add the RfmUsb

Open

The RfmUsb instance must be opened prior to usage.

 rfmUsbDevice.Open(comPort, 115200);

Configuration

All of the configuration settings are assigned via properties of the IRfmUsb interface.

_rfmUsb.Open(serialPort, baudrate);

_rfmUsb.Reset();

_rfmUsb.Timeout = 5000;

_rfmUsb.Modulation = Modulation.Fsk;
_rfmUsb.FrequencyDeviation = 0x01EC;
_rfmUsb.Frequency = 434300000;
_rfmUsb.RxBw = 14;
_rfmUsb.BitRate = 4800;
_rfmUsb.Sync = new List<byte>() { 0x2D, 0xD4 };
_rfmUsb.SyncSize = 1;
_rfmUsb.SyncEnable = true;
_rfmUsb.SyncBitErrors = 0;
_rfmUsb.PacketFormat = true;
_rfmUsb.DcFree = DcFree.Manchester;
_rfmUsb.CrcOn = false;
_rfmUsb.CrcAutoClear = false;
_rfmUsb.AddressFiltering = AddressFilter.None;
_rfmUsb.PayloadLength = 66;

Transmit

Transmit a packet of data with the default transmit timeout. The transmit control registers need to be configured to allow transmission of the packet data.

// Transmit data with default transmission timeouts
rfmUsbDevice.Transmit(new List<byte>() { 0x55, 0xAA, 0x55, 0xAA, 0x55, 0xAA });

Transmit a packet of data with a specific transmit timeout. The transmit control registers need to be configured to allow transmission of the packet data.

// Transmit data with a timeout
rfmUsbDevice.Transmit(new List<byte>() { 0x55, 0xAA, 0x55, 0xAA, 0x55, 0xAA }, 1000);

Transmit And Receive

Transmit a packet and wait for a response with the default transmit and receive timeouts.

// Transmit data and wait for a response with the default 
var response = rfmUsbDevice.TransmitReceive(new List<byte>() { 0x55, 0xAA, 0x55, 0xAA, 0x55, 0xAA });

Transmit a packet and wait for a response with the default receive timeouts and a specified transmit timeout.

// Transmit data and wait for
var response = rfmUsbDevice.TransmitReceive(new List<byte>() { 0x55, 0xAA, 0x55, 0xAA, 0x55, 0xAA }, 1000);

Transmit a packet and wait for a response with a specified transmit and receive timeouts.

// Transmit data and wait for
var response = rfmUsbDevice.TransmitReceive(new List<byte>() { 0x55, 0xAA, 0x55, 0xAA, 0x55, 0xAA }, 1000, 1000 );

Irqs

Set the Dio pin Irq mask.

AutoResetEvent IrqSignal;

void RfmDeviceDioInterrupt(object? sender, DioIrq e)
{
    Console.WriteLine("Dio Irq [{e}]", e);

    if ((e & DioIrq.Dio0) == DioIrq.Dio0)
    {
        IrqSignal.Set();
    }
}

// Setup the radio irq pin enables
rfmUsbDevice.DioInterruptMask = DioIrq.Dio0;

rfmUsbDevice.DioInterrupt += RfmDeviceDioInterrupt;

Wait for an IRQ to occur

IrqSignal.WaitOne(timeout);

// Check the irq
if ((rfmUsbDevice.Irq & Irq.PayloadReady) == Irq.PayloadReady)
{
    // Process packet
}