ForgeUnits.Schemas 1.0.0 License Info

ForgeUnits.Schemas 1.0.0

Autodesk
SOFTWARE LICENSE AGREEMENT
Worldwide

READ CAREFULLY: AUTODESK, INC. (�AUTODESK�) LICENSES THIS SOFTWARE TO YOU ONLY UPON THE CONDITION THAT YOU ACCEPT ALL OF THE TERMS CONTAINED IN THIS SOFTWARE LICENSE AGREEMENT (�AGREEMENT�).
BY SELECTING THE �I ACCEPT� BUTTON BELOW THIS AGREEMENT OR BY INSTALLING, UPLOADING, ACCESSING, OR OTHERWISE COPYING OR USING ALL OR ANY PORTION OF THE SOFTWARE YOU AGREE TO BE LEGALLY BOUND BY THIS AGREEMENT.  A CONTRACT IS THEN FORMED BETWEEN AUTODESK AND EITHER YOU PERSONALLY, IF YOU ACQUIRE THE SOFTWARE FOR YOURSELF, OR THE COMPANY OR OTHER LEGAL ENTITY FOR WHICH YOU ARE ACQUIRING THE SOFTWARE.
IF YOU DO NOT AGREE OR DO NOT WISH TO BIND YOURSELF OR THE ENTITY YOU REPRESENT: (A) DO NOT INSTALL, UPLOAD, ACCESS, OR OTHERWISE COPY OR USE THE SOFTWARE AND (B) SELECT THE �I REJECT� BUTTON BELOW THIS AGREEMENT (WHICH WILL CANCEL THE LOADING OF THE SOFTWARE). INSTALLATION, UPLOADING, ACCESS, OR OTHER COPYING OR USE OF THIS SOFTWARE OR ANY ACCOMPANYING DOCUMENTATION OR MATERIALS EXCEPT AS PERMITTED BY THIS AGREEMENT IS UNAUTHORIZED AND CONSTITUTES A MATERIAL BREACH OF THIS AGREEMENT AND AN INFRINGEMENT OF THE COPYRIGHT AND OTHER INTELLECTUAL PROPERTY RIGHTS IN SUCH SOFTWARE, DOCUMENTATION AND MATERIALS. IF YOU INSTALL, UPLOAD, ACCESS, OR OTHERWISE COPY OR USE ALL OR ANY PORTION OF THIS SOFTWARE WITHOUT ENTERING INTO THIS AGREEMENT OR OTHERWISE OBTAINING WRITTEN PERMISSION OF AUTODESK, OR YOU FAIL TO COMPLY WITH THIS AGREEMENT, YOU ARE VIOLATING COPYRIGHT AND OTHER INTELLECTUAL PROPERTY LAW.  YOU MAY BE LIABLE TO AUTODESK AND ITS LICENSORS FOR DAMAGES, AND YOU MAY BE SUBJECT TO CRIMINAL PENALTIES.
1.	DEFINITIONS
1.1	�Access� means to use or benefit from using the functionality of the Software.
1.2	�Autodesk Materials� is the collective term for the Software, User Documentation, and Excluded Materials. 
1.3	�Computer� means a single electronic device with one or more central processing units (CPUs) that accepts information in digital or similar form and manipulates the information for a specific result based on a sequence of instructions. 
1.4	�Excluded Materials� means any programs, modules, components, or functionality, if any, that may be included on media or with materials delivered to You that are beyond the scope of the functionality described in the User Documentation, or for which You have not paid the applicable fees.
1.5	�Install� means to place a copy of Software onto a hard disk or other storage medium through any means (including, but not limited to, use of an installation utility application accompanying the Software).
1.6	�Software� means the computer program in which this Agreement is embedded or that is delivered prepackaged with this Agreement.  If programs are delivered to You as part of a bundled package, suite, or series, the term Software shall include all programs delivered to You as part of that bundled package, suite, or series and described in the User Documentation.
1.7 �User Documentation� means the explanatory printed or electronic materials that Autodesk or its authorized distributor incorporates in or delivers in or on a package with the Software or sends to You on an invoice, via email, facsimile, or otherwise when or after You acquire or Install the Software, including, but not limited to, license specifications, activation code, license files, instructions on how to use the Software, and/or technical specifications.
1.8	�You� means you personally (i.e., the individual who reads and is prompted to accept this Agreement) if you acquire the Software for yourself, or the company or other legal entity for which you acquire the Software (but not the affiliates, subsidiaries or other related legal entities of such company or legal entity). 
2.	SOFTWARE LICENSE
2.1������� License Grant.� Autodesk grants You a nonsublicensable, nonexclusive, nontransferable, limited license to Install and use machine-readable object code copies of the Software and User Documentation, in accordance with the applicable User Documentation and this Agreement, and to reproduce and distribute copies of the Software in accordance with the terms of this Agreement.� You may Install the Software on one or more Computers in one or more locations; post and make available the Software on a network file server in order to Install the Software onto other Computers or use the Software over such network; and make backup copies of the Software. You may make unlimited copies of the Software and User Documentation and distribute such copies to other persons or entities, including downloading the Software from the Internet or similar on-line source, so long as (i) all such copies contain this Agreement and the same copyright and other proprietary notices that appear on or in the Software and User Documentation, and (ii) You copy and distribute the Software and User Documentation in its entirety, and (iii) You do not distribute incomplete, modified, reverse engineered, or otherwise altered copies of the Software or User Documentation.� You may Access the application programming interfaces that may be included with or in or otherwise available from Autodesk for use with the Software (�API�s�) to develop programs, modules, components or functionality that (i) are compatible with and are used and/or interfaced with the Software and (ii) contribute significant value-added functionality or enhancements to the Software (�API Modules�) provided You may Install and Access such API Modules solely on� Computers where a licensed copy of the Software is also installed and further provided such Installation and Access is solely in connection with Your Installation and Access of the Software and solely for Your internal business needs.� You may not redistribute all or any portion of an API Module.� Autodesk�s license grant (and, with that grant, Your right to Install and use the Software and User Documentation) is conditioned on Your continuous compliance with all license limitations, restrictions and other terms in this Agreement.� If You violate any of these limitations, restrictions or other terms, the license grant will automatically and immediately terminate.� The license descriptions in this Section 2 (Software License) define the scope of rights that Autodesk grants to You.� Any usage of the Software or User Documentation outside the scope of the applicable license grant or otherwise not in accordance with this Agreement constitutes an infringement of Autodesk�s intellectual property rights as well as a material breach of this Agreement.� No license is granted under the terms of this Agreement to Excluded Materials (if any). �
2.2	No Support.  You acknowledge and agree that Autodesk is under no obligation to provide maintenance, support, or upgrades for the Software.  At its sole option and election, Autodesk may upgrade the Software over time to include additional functionality.  Autodesk does not warrant or ensure that the version of the Software You acquire will be compatible with any future major or minor release, version or update of the Software.
2.3	Software Components.  The Software is licensed to You as a single product and its components may not be separated for Installation, Access, distribution or use.  You may copy and distribute the Software and User Documentation only in its entirety, and you will not redistribute: (i) Software (whether it is integrated with other technology as a component or as a standalone product) that does not provide end users access to the complete Software Install process, including this Agreement; or (ii) incomplete, modified, reverse engineered, or otherwise altered copies of the Software or User Documentation.
2.4	Termination.  Upon termination of the license grant or this Agreement, (i) You must cease all use of Autodesk Materials and Uninstall all copies of the Software; and (ii) destroy all Autodesk Materials or, upon request by Autodesk, return all Autodesk Materials to Autodesk or the company from which they were acquired.  Autodesk reserves the right to require You to show satisfactory proof that all copies of the Software have been Uninstalled and all Autodesk Materials have been destroyed or returned.  
3.	PROHIBITED ACTIONS
Autodesk does not permit any of the following actions, and You acknowledge and agree that You will not take any such actions:
3.1	Use.  You will not Install, access, or otherwise copy or use the Autodesk Materials except as expressly authorized by this Agreement.
3.2.	Reverse Engineering.  You will not (and You will not permit any third party to) reverse engineer, decompile, or disassemble the Software or Excluded Materials (if applicable) or otherwise attempt to discover the source code of the Software or Excluded Materials (if applicable).
3.3	Transfers.  You will not rent, loan, lease, sell or sublicense all or any portion of the Autodesk Materials or any rights granted in this Agreement to any other person, or legal entity without the prior written consent of Autodesk.  	
3.4	Notices.  You will not remove, alter, or obscure any proprietary notices, labels, or marks from or on the Autodesk Materials.
3.5	Modifications.  You will not modify, translate, adapt, arrange, or create derivative works based on the Autodesk Materials for any purpose. 
3.6	Circumvention.  
		(a)	You will not utilize any equipment, device, software, or other means designed to circumvent or remove any form of copy protection used by Autodesk in connection with the Software, or use the Software together with any authorization code, serial number, or other copy-protection device not supplied by Autodesk directly or through an authorized distributor.  
		(b) 	You will not utilize any equipment, device, software, or other means designed to circumvent or remove any usage restrictions, or to enable functionality disabled by Autodesk in connection with the Excluded Materials.  You will not bypass or delete any functionality or technical limitations of the Autodesk Materials that prevent or inhibit the unauthorized copying or use of the Excluded Materials.
3.7	Export.  You will not export the Autodesk Materials in violation of this Agreement, or U.S., or other applicable export control laws.
3.8	Exceptions from Prohibitions.  The prohibitions contained in this Section 3. (Prohibited Actions) shall apply to the extent that applicable law (including laws implementing EC Directive 91/250 on the legal protection of computer programs) allows such prohibition to be enforced.  You will bear the burden of proof in demonstrating that applicable law does not allow enforcement of any such prohibition.
4.	ALL RIGHTS RESERVED
Autodesk and its licensors retain title to and ownership of the Autodesk Materials and all copies thereof, and all other rights and interest, including, without limitation, patents, copyrights, trademarks, trade secrets, and other intellectual property rights, in and to the Autodesk Materials and any copies thereof. You have only the limited rights with respect to the Autodesk Materials expressly set forth in this Agreement and You have no other rights, implied or otherwise.  The structure, organization, and code of the Autodesk Materials are valuable trade secrets of Autodesk and its licensors and You shall keep such trade secrets confidential. The Software and User Documentation are licensed, not sold.
5.	NO WARRANTY; DISCLAIMER
AUTODESK AND ITS LICENSORS MAKE AND YOU RECEIVE NO EXPRESS OR IMPLIED WARRANTIES OF ANY KIND WITH RESPECT TO THE SOFTWARE AND THE USER DOCUMENTATION, AND YOU AGREE THAT YOU ACCEPT THE SOFTWARE �AS IS�.  ANY STATEMENTS OR REPRESENTATIONS ABOUT THE SOFTWARE AND ITS FUNCTIONALITY IN THE USER DOCUMENTATION OR ANY COMMUNICATION WITH YOU CONSTITUTE TECHNICAL INFORMATION AND NOT AN EXPRESS WARRANTY OR GUARANTEE.  IN ADDITION, AUTODESK AND ITS LICENSORS SPECIFICALLY DISCLAIM ALL OTHER WARRANTIES INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.  WITHOUT LIMITING THE FOREGOING, AUTODESK DOES NOT WARRANT THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE.
6.	WARNINGS
Functionality Limitations. COMPUTER-AIDED DESIGN SOFTWARE AND OTHER TECHNICAL SOFTWARE ARE TOOLS INTENDED TO BE USED BY TRAINED PROFESSIONALS ONLY. THEY ARE NOT SUBSTITUTES FOR YOUR PROFESSIONAL JUDGMENT OR INDEPENDENT TESTING. COMPUTER-AIDED DESIGN SOFTWARE AND OTHER TECHNICAL SOFTWARE ARE INTENDED TO ASSIST WITH PRODUCT DESIGN AND ARE NOT SUBSTITUTES FOR INDEPENDENT DESIGN ANALYSIS, ESTIMATION, OR TESTING OF PRODUCT STRESS, SAFETY, AND UTILITY. DUE TO THE LARGE VARIETY OF POTENTIAL APPLICATIONS FOR THE SOFTWARE, THE SOFTWARE HAS NOT BEEN TESTED IN ALL SITUATIONS UNDER WHICH IT MAY BE USED. AUTODESK SHALL NOT BE LIABLE IN ANY MANNER WHATSOEVER FOR THE RESULTS OBTAINED THROUGH THE USE OF THE SOFTWARE. PERSONS USING THE SOFTWARE ARE RESPONSIBLE FOR THE SUPERVISION, MANAGEMENT, AND CONTROL OF THE SOFTWARE. THIS RESPONSIBILITY INCLUDES, BUT IS NOT LIMITED TO, THE DETERMINATION OF APPROPRIATE USES FOR THE SOFTWARE AND THE SELECTION OF THE SOFTWARE AND OTHER PROGRAMS TO ACHIEVE INTENDED RESULTS.  PERSONS USING THE SOFTWARE ARE ALSO RESPONSIBLE FOR ESTABLISHING THE ADEQUACY OF INDEPENDENT PROCEDURES FOR TESTING THE RELIABILITY AND ACCURACY OF ANY PROGRAM OUTPUT, INCLUDING ALL ITEMS DESIGNED BY USING THE SOFTWARE.
7. 	LIMITATION OF LIABILITY
IN NO EVENT SHALL AUTODESK OR ITS LICENSORS HAVE ANY LIABILITY FOR ANY LOSS OR DAMAGES OF ANY KIND ARISING OUT OF OR IN CONNECTION WITH THE SOFTWARE OR USER DOCUMENTATAION, INCLUDING DIRECT, INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, REVENUE OR DATA, BUSINESS INTERRUPTION OR COST OF COVER.  THE LIMITATIONS OF LIABILITY IN THIS SECTION 7 SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW TO ANY DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, WHETHER DERIVED FROM CONTRACT, TORT (INCLUDING, BUT NOT LIMITED TO, NEGLIGENCE), OR OTHERWISE, EVEN IF AUTODESK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND REGARDLESS OF WHETHER THE LIMITED REMEDIES AVAILABLE HEREUNDER FAIL OF THEIR ESSENTIAL PURPOSE.  YOU ACKNOWLEDGE THAT THE NO CHARGE LICENSE FEE REFLECTS THIS ALLOCATION OF RISK.
8.	U.S. GOVERNMENT RESTRICTED RIGHTS
All Autodesk Materials provided to the U.S. Government are provided with the same commercial license rights and restrictions described elsewhere herein.
9.	GENERAL
9.1.	No Assignment; Insolvency.  You may not assign this Agreement or any rights hereunder (whether by purchase of stock or assets, merger, change of control, operation of law, or otherwise) and any purported assignment by You shall be void.  The Agreement and the licenses granted hereunder shall terminate without further notice or action by Autodesk if You become bankrupt or insolvent, make an arrangement with Your creditors, or go into liquidation. 
9.2.	Choice of Law.  This Agreement and any disputes arising out of or in connection with this Agreement shall be governed by the laws of the State of California, U.S.A., without reference to conflict-of-laws principles and excluding the UN Convention on Contracts for the International Sale of Goods.
9.3	Entire Agreement.  This Agreement and the applicable User Documentation constitute the entire agreement between us and supersede any other previous or contemporaneous communications, agreements, representations, warranties or advertising with respect to the Software and User Documentation.  Any modifications to this Agreement shall be invalid, unless made in writing and signed by a duly authorized representative of Autodesk.
9.4	Severability.  If and to the extent any provision of this Agreement is held illegal, invalid, or unenforceable in whole or in part under applicable law, such provision or such portion thereof shall be ineffective as to the jurisdiction in which it is illegal, invalid, or unenforceable to the extent of its illegality, invalidity, or unenforceability and shall be deemed modified to the extent necessary to conform to applicable law so as to give the maximum effect to the intent of the parties.  The illegality, invalidity, or unenforceability of such provision in that jurisdiction shall not in any way affect the legality, validity, or enforceability of such provision in any other jurisdiction or affect the legality, validity or enforceability of any other provision of this Agreement. 
9.5	No Waiver.  No term or provision hereof will be considered waived, and no breach excused, unless such waiver is in writing signed on behalf of the party against whom the waiver is asserted.  No waiver (whether express or implied) will constitute a consent to, waiver of, or excuse of any other, different, or subsequent breach.  
9.6	Audits.  To ensure compliance with this Agreement, You agree that upon reasonable notice, Autodesk or Autodesk�s authorized representative shall have the right to inspect and audit Your Installation, Access, and use of the Autodesk Materials.  Any such inspection or audit shall be conducted during regular business hours at Your facilities or electronically, either by Autodesk or by representatives authorized by Autodesk for this purpose.  If such inspections or audits disclose that You have Installed, Accessed, or permitted Access to the Autodesk Materials in a manner that is not permitted under this Agreement, then (i) You are liable to pay for any unpaid license fees as well as the reasonable costs of the audit; and (ii) without limitation of Section 2.1 (License Grant), and unless Autodesk otherwise elects in writing, the license grant with respect to the Software will terminate immediately.  Any information obtained by Autodesk or Autodesk�s authorized representative during the course of such inspection and audit will be used and disclosed by Autodesk solely for purposes of such inspection and audit and for enforcement of Autodesk�s rights under this Agreement and applicable law, unless other uses or disclosures are required under applicable law.  Nothing in this Section shall be deemed to limit any legal or equitable remedies available to Autodesk for violation of this Agreement or applicable law. 
9.7	Language.  The English language version of this Agreement is legally binding in case of any inconsistencies between the English version and any translations.
9.8	Construction.  Ambiguities in this Agreement will not be construed against the drafter.